|2002 Mercedes Benz CLK-GTR Roadster|
When I was working with G&K Auto Conversion/CEE Labs on Nissan Skyline GT-R's, they had a few Porsche 959, McLaren F1, and even this Mercedes Benz CLK-GTR Roadster that was having EPA compliance work completed. Show or Display exempts the vehicle from NHTSA/DOT requirements, but it still needs to meet EPA requirements if you plan on driving the vehicle. This Mercedes is a great example of a Show or Display car. Very unique, very expensive. Has some basis in production car parts by a major manufacturer. Only 26 total street cars. 20 hardtops, and 6 roadsters.
"After the completion of the 20 original CLK GTRs, AMG's specialist group H.W.A., who had assisted in the construction of the CLK GTRs, began construction of a roadster version of the CLK GTR. Built either by modifying an existing CLK GTR or by building a new car from spare chassis and parts, these cars were modified with the removal of their roofs as well as a reconstruction of their engine covers. Also the rear wing was replaced by a separate black wing, close to the one on the race CLK-GTR. Further the Roadster can be recognized by its different grille, which had a large star in it instead of a small version above it. Two rollbars integrating the cockpit headrests were used not only for structural integrity, but also rollover protection. A total of six CLK GTR Roadsters were built by the company."
|One of only six CLK-GTR Roadsters|
The Guinness Book of World Records recorded the CLK GTR as the most expensive production car ever built at the time, with a price of $1,547,620(USD)."
|2002 Mercedes Benz CLK-GTR Roadster|
HOW YOU MAY APPLY FOR PERMISSION TO IMPORT
Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:
Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.