Showing posts with label 1996-1997 Maserati Ghibli Cup. Show all posts
Showing posts with label 1996-1997 Maserati Ghibli Cup. Show all posts

Monday, June 2, 2014

1996-1997 Maserati Ghibli Cup - Approved

1996-1997 Maserati Ghibli Cup
With only 60 of these Maserati Ghilbli Cup produced, they fall well under the 500 maximum for Show or Display. It was more of a special version of the Maserati Ghilbli, still it managed to get approval for Show or display.

Check out this article on Pistonheads.
The Ghibli Cup was derived directly from the Open Cup racing version and modified for use on public roads. Launched at the Bologna Motor Show in December 1995, the 2-liter V6 was rated at 330 bhp at 6,500 rpm, giving the car an effective top speed of 270 km/h (168 mph). The torque value was very constant above 35 kgm from 3250 rpm to 6700 rpm. Compared to the normal Ghibli, the suspension was lowered and stiffened and the front discs were now drilled and equipped with Brembo calipers.

Externally, the car was somewhat understated but the game was given away by 5-spoke Speedline alloy wheels and the racing-type aluminium fuel cap at the base of the rear pillars. The discreet Ghibli Cup logo was located on the doors, only the Maserati badge gracing the boot-lid. Available colors were limited to red, white, yellow or a shade dubbed French Blue. The interior was the sportiest yet in the Biturbo family, though still cosy and well finished. It featured a Momo racing wheel, drilled aluminium pedals, carbon-fibre inserts and black Connolly leather seats.

Just 60 Ghibli Cups were made, each one bearing a numbered plaque on the dash, though interestingly a further 15 Ghibli Cups were produced upon request with a tweaked version of the 2.8-litre engine.
Source: Maserati



Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590


A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.