Tuesday, August 23, 2022

JDM Legend RIPS My R34 GTR in the Mountains of Japan *TARZAN YAMADA*



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Friday, August 19, 2022

Tommy F Yeah's Pleasantly Modified R33 GT-R





HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Friday, July 15, 2022

SHOULD I TRADE MY GTR FOR THIS F80 M3? BAD IDEA?



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Monday, July 11, 2022

I FINALLY GOT MY HANDS ON ONE! (R34 GTR) || Manny Khoshbin

 I FINALLY GOT MY HANDS ON ONE! (R34 GTR) || Manny Khoshbin

   


HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Thursday, June 30, 2022

GTR OWNERS TERRORIZE LOS ANGELES STREETS!!! (R34 VSPEC)

GTR OWNERS TERRORIZE LOS ANGELES STREETS!!! (R34 VSPEC)

   



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Monday, June 27, 2022

£400,000 to build a Nissan Navara with 1100bhp R35 GTR engine!

£400,000 to build a Nissan Navara with 1100bhp R35 GTR engine!

 

This is one of the craziest builds we have ever seen! Baggsy decided to fit a R35 GTR running gear (including suspension + arms) into a bone-stock Nissan Navara pickup truck and it's now an 1100bhp beast! The attention to detail on this build is immense and we were lucky enough to get a full tour around this monster energy demo vehicle at Goodwood Festival of Speed last week. Is this the maddest Navara ever? Is this better than a R35 GTR? Let us know what you think in the comments below guys!

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Saturday, June 25, 2022

Scaring My Wife in my 600hp Single Turbo R32 GTR *AMAZING REACTION*

Scaring My Wife in my 600hp Single Turbo R32 GTR *AMAZING REACTION*



It finally happened. The R32 GTR is now safe at home and ready to rip on the streets! In today's video we take Tiana in the Attack32 for the first time ever! She's seen all of my emotions through the entire time of me building this car, so it's so rewarding to actually get her in the car. The reaction was totally worth it

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Friday, June 3, 2022

2000HP Nissan GT-R R35 BoostLogic ALPHA 22x VIS KOSOVA 0-353 KM/H 🚀 ONBOARD & ACCELERATIONS!

2000HP Nissan GT-R R35 BoostLogic ALPHA 22x VIS KOSOVA 0-353 KM/H 🚀 ONBOARD & ACCELERATIONS!





During the RACE 1000 1/2 Mile event in Germany, I have filmed this insane 2000HP Nissan GT-R R35 AMS Performance ALPHA 22x which has been modified by BoostLogic. The car is currently owned by Vis Kosova and is the current drag racing champion in Albania and Kosovo. Enjoy the video. Liked the video? Click the 'like' button, comment, and feel free to subscribe! Click the 🔔 bell to join the notification squad! This video does not contain any paid collaboration(s). This video does not contain any (free) products and/or services. This video does not contain any purchased products and/or services at a discount. If there is a paid collaboration(s), received products and/or services, purchased products and/or services in the video, this will always be indicated in the video description.






HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Tuesday, May 31, 2022

Tokyo Loop Run in 600hp Nismo Omori R34 GTR!! | EXTREMELY RARE F-Sport R RB28





So happy to finally be back at Daikoku PA! Daikoku is an absolutely legendary meet up spot in the Tokyo, Japan area. Tonight we get a ride in a couple of really amazing GTR's. One in particular is the Nismo Omori Factory R34 GTR F-Sport R. This particular GTR comes with a Triple R GT block. This is one of the most rare spec GTR's available and we got to ride in it! Followed by a classic hang out with friends at the Combini to get snacks and racer coffee. Tokyo Loop Run in 600hp Nismo Omori R34 GTR!! | EXTREMELY RARE F-Sport R RB28 Tokyo Loop Run in 600hp Nismo Omori R34 GTR!! | F-Sport R RB28 Tokyo Loop Run in 600hp Nismo Omori R34 GTR!! | F-Sport R RB28

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Thursday, May 26, 2022

Nissan GT-R generations DRAG RACE 2022



Who’s ready for an almighty Nissan GT-R showdown!! That’s right, we’ve got four generations of Nissan GT-Rs going head-to-head to see just how far these cars have progressed from the R32 through to the R35! When it comes to the R32, R33 & R34, they’re all powered by the same 2.6-litre twin-turbo straight-six, which has a claimed power output of 280hp in each car. However, at the far end, we’ve got the R35 NISMO, which is instead housing a 3.8-litre twin-turbo V6 under the bonnet, which can put down an eye-watering 600hp & 650Nm! So with that in mind, no prizes for guessing who’ll cross the line first. But will we see an upset through the rest of the field? Could the R32 spring a surprise over one of the newer generations? There’s only one way to find out - LET’S RACE!

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Saturday, May 21, 2022

Modifying My R34 GTR With JDM GTR LEGEND!

 

 In today's video we take the R34 GTR and travel to one of my favorite GTR pro shops in all of Japan, Midori Seibi. When we were there previously, we installed the Midori Seibi Titanium exhaust and this time we are refreshing the suspension!


HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Tuesday, May 10, 2022

1/2 Price GTR! - Did I Make A Mistake?

1/2 Price GTR! - Did I Make A Mistake?




Quick little review/overview of the first week of owning and driving my 1/2 price Nissan r35 Gtr! We take this thing for a test drive and go over some of my plans to get it. itall fixed up!
HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Wednesday, May 4, 2022

Building a 2010 Nissan R35 GTR in 14 Minutes!

Building a 2010 Nissan R35 GTR in 14 Minutes!







HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Thursday, April 28, 2022

R34 GTR 24 hour TURBO UPGRADE with EXHAUST!

R34 GTR 24 hour TURBO UPGRADE with EXHAUST!!!



technically it took 30 hours, but we did single turbo upgrade, intercooler piping, full downpipes, dump tube, and exhaust, in 30 hours. comment how you think it sounds!!

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Monday, April 25, 2022

MY FIRST NISSAN GTR!

MY FIRST NISSAN GTR!




HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Wednesday, April 20, 2022

1000HP 720S VS 1000HP GTR STREET RACE!!! *Must Watch*

1000HP 720S VS 1000HP GTR STREET RACE!!! *Must Watch*






HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Saturday, April 16, 2022

Carfreitag Nürburgring Tankstelle 2022 - SVJ, Skyline GTR, SF90, R32 Turbo, GTR Black Series, STO,..

Carfreitag Nürburgring Tankstelle 2022 - SVJ, Skyline GTR, SF90, R32 Turbo, GTR Black Series, STO,..


 
In this video you'll see the best moments of Carfreitag Nurburging 2022 at the Tankstelle (gas station) and a bit of Boulevard as well. Many rare, brand new supercars and some lovely classics!



HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Tuesday, April 5, 2022

New 930hp AMG GT Black Series!

New 930hp AMG GT Black Series!

 
 

We’ve got some exciting news for you AMG fanboys… An all-new AMG GT is on the way! And let’s face it, it’s about time! The current iteration of the GT was first introduced in 2014, so it’s about time we got our hands on a new one. What’s more, we’ve got some good early news - it’ll still be packing the glorious AMG 4-litre twin-turbo V8 engine! But that’s not all - we’ve got a feeling it’ll come with similar hybrid tech that’s currently used in AMG Formula 1 engines! With that in mind, we’ve got a feeling the new AMG GT will be able to produce upwards of 790hp!! So if there’s a new GT coming, you know what that means… There’ll also be a new AMG GT Black Series on the way! Given the expected hybrid tech that’s set to be included within the standard GT, we’re expecting it to be able to pump out 930hp!! You’d better start saving now though, we think it’s likely to cost at least £400,000! Want to check out some images of what both cars may look like? Keep watching to check out our exclusive renders!


HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Tuesday, March 29, 2022

Modified Cars leaving Car Show! - GTR near CRASH, TwinTurbo R8, 1200HP Supra, GT3 RWB, RS4 B5, 600LT

Modified Cars leaving Car Show! - GTR near CRASH, TwinTurbo R8, 1200HP Supra, GT3 RWB, RS4 B5, 600LT


JDM / Euro / American Cars leaving Weekend BDG (Les Bruleurs De Gommes) 2022! A wide variety of Supercars & Modified Cars showed at the two-day event. The police was there most of the time, but still there were many burnouts, powerslides and crazy accelerations!

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Saturday, March 26, 2022

O SONHO VIROU REALIDADE!! '' GTR★LIBERTYWALK ''

O SONHO VIROU REALIDADE!! '' GTR★LIBERTYWALK ''



NISSAN GTR LBWK★PERFORMANCE FENIX 2.0 🐲 SONHO QUE SE TORNOU REALIDADE - DREAM THAT CAME TRUE! Muito obrigado a todos os envolvidos no projeto, Deus por me manter de pé diante de toda trajetória, familia XERECRAZY por SEMPRE estarem comigo. Sem vocês nada seria possível. I would like to thank everybody that is part of the project! LIBERTY WALK for making this dream come true and everybody else that have helped bring this to reality.



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Saturday, March 19, 2022

Aventador SVJ v NISMO GT-R v M5 CS: DRAG RACE

Aventador SVJ v NISMO GT-R v M5 CS: DRAG RACE

 It may be raining, but this could still be one of the greatest carwow drag races of all time! We’ve got Mat lining up in his all-new BMW M5 CS, and next to him we’ve got a Lamborghini Aventador SVJ & a Nissan GT-R NISMO!! Now we’re sure we don’t need to tell you, but the stats on these cars are absolutely WILD! First up we have the BMW, which is powered by a 4.4-litre twin-turbo V8 that’s good for 635hp & 750Nm of torque. It weighs in at around 1825kg, and it’ll set you back £141,000. Then we’ve got the Lambo, which houses an almighty 6.5-litre naturally-aspirated V12 under the bonnet, which can put down 770hp & 720Nm of torque! Lamborghini claims it weighs in at around 1500kg, and it’ll burn a huge hole in your pocket, costing upwards of £360,000!! Then finally we have the Nissan. It’s powered by a 3.8-litre twin-turbo V6, and it’ll produce 600hp & 650Nm. It’s lighter than the BMW, at 1700kg, but it’s also more expensive, costing around £180,000. So, can you pick a winner?! There’s only one way to find out what’ll happen…. LET’S RACE!


HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Friday, March 18, 2022

Vehicles Determined Eligible for Show or Display January 2022

Mspec Nur


2020 McLaren Speedtail
2020 McLaren Speedtail

This update came up in January of 2022. The 2021 list of approved vehicles for Show or Display had been trimmed a little. They removed all the cars that are over 25 years old, and added a few interesting Show or Display cars, mostly hypercars. Some not yet produced still

2020-2021 Bugatti Divo
2020-2021 Bugatti Divo

New for 2022. 

2018 Ferrari J50
2021 Lotus Exige Cup 430 Final Edition
1998 Porsche 911 Turbo with XLC Option Package
1998 Porsche 911 Turbo S


2022 Gordon Murray Automotive T.50
2022 Gordon Murray Automotive T.50

Its interesting that the 2020 Gordon Murray Automotive T.50 is on the list of approved vehicles, but won't even be delivered until 2022. Not only is it not current production, its future production.  Since all these vehicles are very limited in number, its very unlikely that they will ever hit 500 cars made. 

The full current list of vehicles eligible for importation under Show or Display January 2022



2003 Aston Martin DB7 Zagato Coupe
2014-2018 Aston Martin Lagonda Taraf
2011 Aston Martin One-77
2012-2013 Aston Martin V12 Zagato
2004 Aston Martin Vanquish Zagato Roadster
1999-2000 Aston Martin Vantage Le Mans
2012 BMW M3 CRT
2020-2021 Bugatti Divo
2005 Ferrari Enzo #400 (Pope John Paul II)
2018 Ferrari J50
2019-2022 Ferrari  Monza SP1 and SP2
2013 Ferrari SP30
2022 Gordon Murray Automotive T.50
1997 Gruter & Gut (GG) Duetto Sidecar Motorcycle
2000 Holden GTS-R
2015 Koenigsegg One:1 Sports Car
1999-2000 Lamborghini Diablo GT
2016 Land Rover Defender Celebration Autobiography
2016 Land Rover Defender Celebration Heritage
2021-2023 Lotus Evija
2011 Lotus Evora GTE F1 Limited Edition
2021 Lotus Exige Cup 430 Final Edition
1996-1997 Maserati Ghibli Cup 2-Dr Coupe
2004-2005 Maserati MC 12
1996-1998 McLaren F-1
2020 McLaren Speedtail
2004-2007 Mercedes-Benz CLK DTM AMG
1998-1999 Mercedes-Benz CLK-GTR Coupe
2002 Mercedes-Benz CLK-GTR Roadster
2011, 2013 Mercedes-Benz G 500 Cabriolet Final Edition 200
2013-2015 Mercedes-Benz G63 AMG 6x6
2017-2018 Mercedes-Benz Maybach G650 Landaulet
2009 Mercedes-Benz McLaren SLR 722S 
2009 Mercedes-Benz SLR McLaren Stirling Moss
2004 MG TF 80th Anniversary Limited Edition (RHD/UK)
2010 Morgan Aeromax
2018 Morgan Plus 8 Speedster/Roadster 50th Anniversary Edition
2020-2021 Morgan Plus 8 GTR
2002 Nissan Skyline R34 GT-R M-Spec Nur 
1999 Nissan Skyline R34 GT-R V-Spec Early Model Limited Edition (Midnight Purple II)
2010-2018 Noble M600 Carbon Sport
2011 Oullim Spirra S
1999-2018 Pagani Zonda 
1998 Porsche 911 Carrera 4S (993) (Last Made) 
1996 Porsche 911 Carrera RS (993)
2004 Porsche 911 GT3 RS (996)
2010 Porsche 911 Sport Classic (997)
1996, 1998 Porsche 911 Carrera GT2 (993)
1997-1998 Porsche 911 GT1 Strassenversion (993)
1998 Porsche 911 Turbo with XLC Option Package
1998 Porsche 911 Turbo S
2016-2021 Rimac Automobili Concept One
1985-1995 RMA Amphi-Ranger 2800 SR
2000 Rover Mini Cooper S (Last 50 Made)
1998 Subaru Impreza 22B STi
1997 Toyota RAV4-EV (SWB Prototype)




HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.