Wednesday, October 31, 2012

Porsche 911 GT1 Strassenversion unloading at Spa-Francorchamps !

Porsche 911 GT1 Strassenversion unloading at Spa-Francorchamps !


"Porsche 911 GT1 Strassenversion being unloaded at Circuit de Spa-Francorchamps in Belgium. Due circumstances, we were not able to film this 911 GT1 Strassenversion doing some laps around the track. In the video you see how the 911 GT1 Strassenversion is unloaded from the trailer and drove in the pitbox and pitlane. This 911 GT1 was transported to the track in a customized trailer."
HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT
Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.

Monday, October 29, 2012

2002 Mercedes CLK GTR Roadster Video- Approved

2002 Mercedes CLK GTR Roadster Video

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle.

Sunday, October 28, 2012

1987 Toyota Carina - Not Approved

1987 Toyota Carina
This is another car, now over 21 years old, so EPA exempt in original configuration  and over 25 years old, so NHTSA/DOT exempt.  However originally it was not approved.  Not a lot of specifics in what this car actually was, but probably this car.

"The Toyota Carina ED was a Japanese compact car created in 1985 as a companion to the 1984 Carina sedan. It was positioned as the 4-door Celica coupe, ushering in a new styling and appearance direction for Toyota products. It gave Toyota Store dealerships an alternative to buyers who desired the luxury of the larger Toyota Crown hardtop, without the tax obligations of a car that exceeded Japanese Government regulations for vehicles larger than the "compact" class. Its design sought to emulate the hardtop styling of large American and European sedans, resulting in a small, low cabin with longer front and rear ends. The ED's B-pillar stood up in the middle with no purpose other than to hinge the rear door on; it was not attached to the roof side of the cabin. "ED" is the initials of "Exciting" and "Dressy"."

No numbers are listed anywhere, but its a normal production car, a lot more than 500 cars produced. Nothing special, nothing technologically significant. Does not meet "Show or Display" requirements. However, now over 25 years old, so import to your hearts content.

Source: Wikipedia

HELP


Thursday, October 25, 2012

2002 Mercedes Benz CLK-GTR Roadster - Approved

2002 Mercedes Benz CLK-GTR Roadster

When I was working with G&K Auto Conversion/CEE Labs on Nissan Skyline GT-R's, they had a few Porsche 959, McLaren F1, and even this Mercedes Benz CLK-GTR Roadster that was having EPA compliance work completed. Show or Display exempts the vehicle from NHTSA/DOT requirements, but it still needs to meet EPA requirements if you plan on driving the vehicle.   This Mercedes is a great example of a Show or Display car. Very unique, very expensive. Has some basis in production car parts by a major manufacturer.  Only 26 total street cars. 20 hardtops, and 6 roadsters.

"After the completion of the 20 original CLK GTRs, AMG's specialist group H.W.A., who had assisted in the construction of the CLK GTRs, began construction of a roadster version of the CLK GTR. Built either by modifying an existing CLK GTR or by building a new car from spare chassis and parts, these cars were modified with the removal of their roofs as well as a reconstruction of their engine covers. Also the rear wing was replaced by a separate black wing, close to the one on the race CLK-GTR. Further the Roadster can be recognized by its different grille, which had a large star in it instead of a small version above it. Two rollbars integrating the cockpit headrests were used not only for structural integrity, but also rollover protection. A total of six CLK GTR Roadsters were built by the company."
One of only six CLK-GTR Roadsters
"Ilmor Engineering provided enhancements to the engine, increasing displacement from 6.0L to 6.9L. This increase in displacement coupled with the removal of a racing air restrictor allowed for 612 PS (450 kW; 604 hp) and torque to 775 N·m (572 lb·ft). Mercedes-AMG claimed 0-100 km/h (62 mph) in 3.8 seconds and a top speed of 320 km/h (199 mph).
The Guinness Book of World Records recorded the CLK GTR as the most expensive production car ever built at the time, with a price of $1,547,620(USD)."

2002 Mercedes Benz CLK-GTR Roadster

Source: Wikipedia and 2009gtr.com

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT


Tuesday, October 23, 2012

1991 Pegaso Z-103 - Not Approved

1991 Pegaso Z-103

The 1991 Pegaso Z-103 is another example of a kit or replica car that was not approved for Show or Display.  There were only 11 made, but being a  replica of an earlier car does not make it historically or technologically significant.  In a couple of years, it will be over 25 years old and exempt from NHTSA/DOT standards.


"In 1991 a financial group in the country, in collaboration with a British company (the design firm IAD), presented in the reissue market Pegaso Z-103 SS1 to be produced in limited series. Only 11 were manufactured cars. The Z-103 Replica takes a Rover V8 engine of 3.9 liter aluminum interior very similar to the original model with leather trim made by ArtespaƱa.

As for the exterior, the design of this two-seater roadster is true to an embodiment of Catalan Serra bodybuilder 1955, although windshield has greater angle of curvature on the sides. Also incorporated frameless windows in the doors, as in the original version had "windows" clear plastic emergency. On the back it incorporates three lights on each side, as the original model did not comply with current legislation.

Also, the fabric roof is more broad and straight, providing more space for the occupants, and bumpers are available at both ends of the body and outside rearview mirror.

Other changes which affect the operation of the car consist of disc brakes (instead of the drum), the gearbox five speed synchronized steering rack and tank situated above the rear axle, which in the most protected original.

Source : http://pegasos.webcindario.com/mserra.htm

HELP