Vehicles Determined Eligible For Importation For Show or Display - February 2017

New list: March 2021 Vehicles Determined Eligible for Show or Display

2002 Nissan Skyline GT-R Mspec Nur.  Eligible for Show or Display

If a particular make, model, and model year vehicle has already been determined eligible for importation for purposes of Show or Display, an application to import such a vehicle need not include documentation to support the technological and/or historical significance of the vehicle. All the other information on the application is required. Vehicles previously determined eligible are listed below.
Feb 2017

Page 4-6 are vehicles determined NOT eligible for Show or Display.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1992 Subaru Version-L Alcyone SVX 4WS - Approved

This is another odd one that got approval. Someone wanted a 4WS SVX enough to get it on the list of approved vehicles for Show or Display.  Similar EPA certified cars were sold in the US, so bringing them into EPA compliance wouldn't have been an impossible task.

The Japanese-spec "SVX L" received four-wheel steering in 1991 and 1992, model code "CXD" (1,905 built). The VTD equipped versions received the "CXW" chassis code.

A sportier continuous traction delivery system, called VTD (variable torque distribution) by Subaru, was used in vehicles for sale in Japan, the UK, the Benelux region, Sweden, Australia, Spain, Austria and Brazil. The VTD AWD system is a permanent AWD due to its 36/64 split.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1998-1999 Mercedes Benz CLK-GTR Coupe - Approved

1998-1999 Mercedes Benz CLK-GTR Coupe - Approved

Here is another car that fits into Show or Display well. 35 total cars. 20 road going coupes, 6 road going roadsters(also approved for Show or Display).  Homologation special for racing.  6.9 liter V12. 604 horsepower. 

Even though the FIA GT1 class was cancelled for 1999, Mercedes was obliged to finally deliver the required 25 road cars they had promised. An initial road car was built in 1997 in order to meet initial FIA requirements, but this car was retained by Mercedes. For the other 25 road cars, each was built by AMG at the Affalterbach factory between winter of 1998 and summer of 1999 and differed only slightly from the race car. All of the 25 CLK GTRs ever built were left hand drive except for one which was specially built for Sultan Hassanal Bolkiah of Brunei. Driver comfort and refinements were at a minimum in the construction of the road cars as Mercedes-Benz wished to not only offer customers a true race car, but also to attempt to keep the price low. Leather was used in the interior and an air conditioning system was offered. Two small storage lockers were also built underneath each upward swinging door. Traction control was also added for driver safety.
The car retained much of the design of the original CLK GTR instead of the CLK LM, including the V12 and many stylistic elements. One key difference was the rear wing, which used a hoop-style integrated wing in place of the separate racing wing. From the otherwise unrelated standard production Mercedes-Benz CLK, only the instrumentation, front grille and the four headlamps were used.
Ilmor Engineering provided enhancements to the engine, increasing displacement from 6.0L to 6.9L. This increase in displacement coupled with the removal of a racing air restrictor allowed for 612 PS (450 kW; 604 hp) and torque to 775 N·m (572 lb·ft). Mercedes-AMG claimed 0-100 km/h (62 mph) in 3.8 seconds and a top speed of 320 km/h (199 mph).

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Eligible and Not Eligible Vehicles Under Show or Display - October 22, 2014

Not Eligible - 1998 Nissan Skyline GT-R Autech 40th Anniversary Version

Check out the updated list below of vehicles that are eligible and not eligible for the Show or Display exemption.  At 25 years old, vehicles are exempt from NHTSA requirements. Contact importavehicle.com for more information on 25 year old car importation.

1996-1997 Maserati Ghibli Cup - Approved

1996-1997 Maserati Ghibli Cup

With only 60 of these Maserati Ghilbli Cup produced, they fall well under the 500 maximum for Show or Display. It was more of a special version of the Maserati Ghilbli, still it managed to get approval for Show or display.

Check out this article on Pistonheads.

The Ghibli Cup was derived directly from the Open Cup racing version and modified for use on public roads. Launched at the Bologna Motor Show in December 1995, the 2-liter V6 was rated at 330 bhp at 6,500 rpm, giving the car an effective top speed of 270 km/h (168 mph). The torque value was very constant above 35 kgm from 3250 rpm to 6700 rpm. Compared to the normal Ghibli, the suspension was lowered and stiffened and the front discs were now drilled and equipped with Brembo calipers.

Externally, the car was somewhat understated but the game was given away by 5-spoke Speedline alloy wheels and the racing-type aluminium fuel cap at the base of the rear pillars. The discreet Ghibli Cup logo was located on the doors, only the Maserati badge gracing the boot-lid. Available colors were limited to red, white, yellow or a shade dubbed French Blue. The interior was the sportiest yet in the Biturbo family, though still cosy and well finished. It featured a Momo racing wheel, drilled aluminium pedals, carbon-fibre inserts and black Connolly leather seats.

Just 60 Ghibli Cups were made, each one bearing a numbered plaque on the dash, though interestingly a further 15 Ghibli Cups were produced upon request with a tweaked version of the 2.8-litre engine.

Source: Maserati

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

2010 Morgan Aeromax - Approved

2010 Morgan Aeromax

2010 Morgan Aeromax

There were only 100 Morgan Aeromax's produced, meeting the first section of the Show or Display requirements. It really isn't very technologically or historically significant, but I think someone might have a soft spot for Morgans, so it was approved.  It has a BMW V8 engine, that is capable of meeting EPA requirements.

The Morgan Aeromax is a coupé variation of the Aero 8. Production was limited to 100 cars.

Source: Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1978 Australian Ford Falcon XC Bathurst Cobra - Approved

1978 Australian Ford Falcon XC Bathurst Cobra

1978 Australian Ford Falcon XC Bathurst Cobra

Australia has had its own division of Ford since 1925, unfortunately the Australian manufacturing is going to stop in October 2016 due to rising costs and slow sales. They build cars for the Australian market, that often aren't sold in other parts of the world. In this case, as a special last edition, they made 400 of these Ford Falcon XC Bathurst Cobras in 1978.  Now these cars are over 25 years old, and could be imported exempt from FMVSS.  Since there were only 400 cars produced, last of the run, this was a good car for Show or Display. 

"In 1978, Ford Australia unveiled plans for an all-new Falcon, dubbed the XD, that would be released in 1979. Unlike the current XC, the new model would be offered only as a four-door sedan or station wagon, meaning the two-door XC Hardtops of 1978 would be the last of that design.

In December 1977 Ford built 13 special order XC Falcon GS Hardtops. These cars were specially modified in the "Parts and Accessories" or P&A workshop, at Ford's Broadmeadows factory. All vehicles were modified and fitted with the body mods and mechanical specifications (including the "evolution" upgrades) approved by CAMSfor homologation. Changes were mostly designed to enhance race durability, these vehicles, often referred to as "Pre-Cobras", were inteneded to be raced by teams in the 1978 ATCC season. The changes made in these Hardtops later formed the basis the 30 Option 97 Cobras [1]

When final production of the XC Hardtop at the Broadmeadows Assembly plant ended in March 1978, 400 body shells were left unsold and Ford Australia faced a dilemma of how to market them, rather than scrapping them or attempting to sell them to customers who would otherwise wait for the XD. When an original proposal to turn these cars into Playboy-themed cars (complete with "bunny" decals) was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was touring Australia at the time. He and a local design team elected to capitalise onAllan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "totally American" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype was built in late April 1978 and production began that same July.

The cars were painted bold blue and Olympic blue racing stripes and finished with snow white and "Cobra" emblems, a throwback to Carroll Shelby's Mustangs of the 1960s that made the car easily identifiable as a Fordmuscle car. Unusually, the bodyshells were painted blue first, the intended blue stripes then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially-numbered plaque (from 1 to 400) in the dash. The first 200 produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland (the exception Build number 1 was a 302 and Build Number 351 was a 351).

Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes and limited slip axles, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were fitted with sport cloth seats in black with blue inserts and based on the 1978 Ford Falcon GS Coupe. From number 2 to 31 were known as Option 97, were fitted with optional parts to allow homologation for racing, including twin thermostatically controlled fans, an engine oil cooler and racing seats. They were identified from the other 370 Option 96 Cobras by a large rear-opening bulge in the hood. Allan Moffat raced a "look a like" Replica in 1978 Bathurst 1000.

Falcon Cobras are still highly revered by collectors across Australia and most still exist. A mint example can be worth upwards of $100,000."

Source: Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1990-1992 Lotus Opel Omega (LHD)

Here is another car that has been approved for Show or Display. They are getting close to being 25 years old, so if you wanted to wait, you could always wait until the car is 25 years old.  Very specific it having to be left hand drive (LHD). The prices overseas look like they are in the $40,000 range for one of these cars. 3.6 liter twin turbo.  377 horsepower, 177 mph sedan. Looks and sounds like a fun car.

3.6 liter twin turbo. 

Performance modifications started with an upgraded engine, which was enhanced by Lotus from the standard Opel 2969 cc 24v straight six unit (used in the GSi). The engine was enlarged to a capacity of 3615 cc.[2] Lotus then added twin Garrett T25 turbochargers, which provide up to 0.7 bar of boost from about 1500 rpm. The original distributor ignition system of the engine was replaced with a three-coil wasted spark system. The distributor drive was re-purposed as a water pump drive for the water-air intercooler circuit. The intercooler itself is manufactured by Behr and is capable of reducing the temperature of the compressed charge from 120°C to 60°C.[3][4]

In addition to fitting two turbochargers and an intercooler system, Lotus directed a number of engineering changes to the engine so that it would perform reliably with the higher power output. To cope with the higher cylinder pressures (about 95 bar), the external webbing on the engine block was reinforced. The crankshaft was replaced as well; early development crankshafts were machined from billet steel in Italy, but the production units were forged by Opel and sent to Maschinenfabrik Alfing Kessler for machining. The cylinder head was left mostly the same as the 24-valve head from the Opel Omega, although the combustion chamber was milled to reduce the static compression ratio to 8.2:1 (from 10.0:1). The engine is fitted with forged slipper pistons produced by Mahle. Piston connecting rods were replaced with new units made to an original Lotus design.[3]

The same six-speed manual ZF transmission as fitted to a contemporary Chevrolet Corvette ZR-1 was used to transfer this power to the rear wheels via a rear limited-slip differential from the V8

For more information on the Lotus Opel Omega check out Wikipedia.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

New Vehicles on the Approved and Not Approved List for Show or Display.

Anyone that checked the Approved/Disapproved List for Show or Display prior to May 2013, would have noticed that it hadn't been updated since March, 2011. So back in May, the new list came out with several new vehicles on each list.  Lots of Skyline GT-R's added to the list under the NOT side, but the NISMO added on the approved side. Check out all the cars  below. More info on each to come later.

Approved

2011 Aston Martin One-77 -YES

2012 BMW M3 CRT -YES

1995 Land Rover Vogue 25th Anniversary Final Edition -YES

1991 Maserati Shamal -YES

1990 Mercedes Benz 190E 2.5-16 Evolution II -YES

1990 Nissan Nismo R32 Skyline GT-R (BNR32-100000 to BNR32-100562) -YES

Two 1990 Nissan Skyline GT-R NISMO's

2004 Porsche 911 GT3 RS -YES

1999-2000 Aston Martin Vantage LeMans Approved

1999-2000 Aston Martin Vantage LeMans

1999-2000 Aston Martin Vantage LeMans was approved for the Show or Display exemption. There were a total of 40 cars made to commemorate 40 years since Aston Martin's LeMans victory.  With just 40 made, special engine and features to replicate the DBR-1, this is another vehicle that fits into Show or Display, and was approved for the NHTSA exemption.

This car was presented in Geneva in 1999, the 40th anniversary of Aston Martin's victory at that race. It was decided that only a limited series of 40 Vantage Le Mans would be built, one for each year since the Le Mans victory. These cars were the only Aston Martin ever sold with the Le Mans name, and are different and better than any of the previous Aston Martin V8.
The engine delivers 612 PS (450 kW; 604 hp) and 820 N·m (600 lb·ft) of torque, whilst the suspension was also reinforced with special Koni shock-absorbers and stiffer anti-roll bars. The bodywork featured a blanked-out front grille and modified side vents – replicating the side vents of the Le Mans winning DBR-1 – as well as a bigger front spoiler and rear skirt. The interior was reworked with a gigantic rev-meter, a special Titanium finish on some parts, and all possible options such as heated windshield, parking radars, traction control, heated electric seats, and full Connolly leather upholstery with matching Wilton pure wool carpets. Wheels were the same Dymag magnesium units as seen on most V600s. Performance was high, with a claimed top speed of 200 mph (or 320 km/h) and zero to 100 km/h in 3.9 seconds. The keyholder was in sterling silver and a map from Newport-Pagnell to the legendary Le Mans track was provided in the delivery documents, for owners who would like to do the pilgrimage. Each "Le Mans" was made upon special commission and fitted with a number plate indicating also the name of the first owner.

Source: Wikipedia



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

2004-2005 Maserati MC 12 - Approved For Show or Display

2004-2005 Maserati MC 12

The 2005 to 2005 Maserati MC12 is a perfect example of a car that the Show or Display law was written for. The MC12 is a FIA GT1 homologation special. 30 cars made in 2004, of which 25 were sold to the public. 25 made in 2005.  Built off a Ferrari Enzo, sharing much with the Enzo. Think badge engineering, on a much grander, and more expensive scale. If you have the means, then you probably have one.

The MC12 sports a 232 kilogram (511 lb), six-litre (5,998 cc/366 cu in) Enzo Ferrari-derived V12 engine, mounted at 65°.[14] Each cylinder has four valves, lubricated via a dry sump system, and a compression ratio of 11.2:1.[6] These combine to provide a maximum torque of 652 newton metres (481 lbf·ft) at 5500 rpm and a maximum power of 630 PS (460 kW; 620 hp) at 7500 rpm.[6] The redline rpm is indicated at 7500—despite being safe up to 7700—whereas the Enzo has redline at 8200 rpm.[1]

The Maserati MC12 can accelerate from 0–100 kilometres per hour (62 mph) in 3.8 seconds (though Motor Trend Magazine managed 3.7 seconds) and on to 200 kilometres per hour (125 mph) in 9.9 seconds.[1][4][5] It can complete a standing (from stationary) quarter mile in 11.3 seconds with a terminal speed of 200 kilometres per hour (125 mph) or a standing kilometre in 20.1 seconds.[1][5] The maximum speed of the Maserati MC12 is 330 kilometres per hour (205 mph).[5]

The power is fed to the wheels through a rear-mounted, six-speed semi-automatic transmission. The gearbox is the same as the Enzo's transmission (tuned to different gear ratios) but renamed "Maserati Cambiocorsa". It provides a shift time of just 150 milliseconds, and is mechanical with a 215 millimetre (8.5 in) twin plate dry clutch.[4][7][15]

2004-2005 Maserati MC 12

Source:Wikipeida
HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Road and Track Magazine Article : GT-R The Hard Way

1990 Nissan Skyline GT-R NISMO

Thanks to Alex and Chris over at Road and Track Magazine for their article on Show or Display, and the 1990 Nissan Skyline GT-R NISMO.  The Nissan Skyline GT-R has been my passion for many years.

Sean Morris was born to win battles with mountains of paperwork and unenthusiastic transportation officials. His website, showordisplay.com, is the latest effort in a lifetime spent pursuing the cars we’re not supposed to have. Call it the family business. Other Morris’ export travel trailers to Australia and shipped American muscle to Japan while the island economy boomed. Maybe there’s a genetic inclination toward patience as well as unburned hydrocarbons. It would have served well during the year-long wait for the GT-R’s exemption to appear in the mail.

My full story about applying for, and then importing the 1990 NISMO Nissan Skyline GT-R.
http://www.showordisplay.com/2012/12/1990-nissan-nismo-skyline-r32-gt-r.html

Approved Cars for Show or Display
Not Approved Cars

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1988-1991 BMW Z1 - Approved

1988-1991 BMW Z1 - Approved

BMW Z1

Do you remember the BMW with the weird doors? This is it. The BMW Z1, with retractable doors. They don't open, they drop down. This car was approved for Show or Display, although now the 1988 cars are actually over 25 years old, and NHTSA exempt.  BMW sold 8,000 BMW Z1's, much outside the normal 500 cars for Show or Display, someone at the NHTSA must have liked the little Miataesk roadster with the odd doors.

The doors retract vertically down into the car's body instead of swinging outward or upward. The inspiration for these doors came from more traditional roadsters which often feature removable metal or cloth doors. Because removable doors did not fit within BMW's design goals, the retractable doors were installed instead.

BMW Z1 Approved for Show or Display

More information on the BMW Z1 at Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

2004 Aston Martin Vanquish Zagato - Approved

2004 Aston Martin Vanquish Zagato

2004 Aston Martin Vanquish Zagato

 This car looks like it was a one off concept car by Aston Martin. Unique, less than 500 made. Fits the Show or Display requirements and was approved for this exemption. Since it was based off the hardtop car, the engine should have been close to what was offered in the USA. 

The Vanquish was the basis of two concept cars, both shown at the International Geneva Motor Show in 2004, the Zagato Roadster (a 2-seat convertible) and the Bertone Jet 2 (a 2-door shooting brake).

Zagato and Aston Martin: a strong alliance that goes back to the 60s with the legendary DB4 GTZ, continued in the 80s with the Vantage and Volante, and is now firmer than ever in the new millennium with the DB7 Zagato and American Roadster 1.

These are the cult cars of collectors and enthusiasts, always prime examples of the “instant classic”.

At this year’s Geneva Motor Show, Zagato is presenting the Roadster version of the Aston Martin Vanquish, partly leaving unchanged the original project. For the first time, this Milan workshop is not giving an entirely new look to the production model, but is offering an interesting variation of the Vanquish, introducing innovative, futuristic touches of style.

While the Aston Martin DB7 Zagato and AR1 were initially presented to customers in the form of a limited edition, immediately sold out, the Vanquish Roadster is a “provocation” proposed by Zagato with the backing of Aston Martin itself.

Close cooperation between Nori Harada, Zagato’s Automotive Chief Designer, and Peter Hutchinson, Design Manager at Aston Martin, has resulted in this new car introducing elements that are a sharp break with the Roadster segment.

A decidedly original interpretation that combines the totally unique design of the rear with the introduction of a functional modular cover system.

A hard top for winter, developed to not appear as an add-on but as an integral part that also takes in the rear. On warmer days of the year, its place is taken by a transparent hardened glass and an easily used soft cover. 

Developed by Zagato’s engineers, this soft top is easily and simply mounted and, when not in use, is held in the luggage compartment without taking up much space.

The car has a round rear light cluster, a tapered tail to best feature the wheelbox and a completely new rear bumper. The hardened glass, with its curvy ‘double bubble’ form, emphasises how unique and valued is this proposal, balancing in a different, almost extravagant way, the relationship between the solid and void. 

Special care has been applied to the interior trim, made exclusive by the design and type of seaming introduced.

A luggage compartment immediately behind the seats can also be seen through the glass cover.

At the front, the Vanquish Roadster proposal retains the design of the coupe version famous for being James Bond’s most recent car.

Vanquish Roadster 

Height: 1265 mm

Width: 1923 mm

Length: 4685 mm

Wheelbase: 2690 mm

Front track: 1572 mm

Rear track: 1584 mm

Engine: V-12 

Capacity: 5935 cc

Torque Nm/rpm: 555/5000

Weight/power ratio: 541

Max speed: n.a.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1992-1995 Bugatti EB110

Bugatti EB110

1992-1995 Bugatti EB110

The Bugatti EB110 is another one of those cars that fits into the Show or Display requirements pretty well. It was sort of an orphan car. Bugatti eventually went bankrupt and was purchased by VW. However before then they built 139 of these 3.5 liter V12 quad turbo EB110's.

The car has a 60-valve, quad-turbo V12 powering all four wheels through a six-speed gearbox. The 3.5 L (3499 cc) engine has a bore of 81 mm (3.2 in) and a stroke of 56.6 mm (2.23 in) and is capable of 553 hp (412 kW; 561 PS) at 8000 rpm. Acceleration to 100 km/h (62 mph) takes 4.9 seconds, and the GT has a top speed of 213 mph (343 km/h).[1]

The car uses a double wishbone suspension, with the chassis built by Aérospatiale, an aircraft company, and made from carbon fiber. Equipped with Gandini's famous lifting scissor doors, it has a glass engine cover that provides a view of the V12 engine along with a speed-sensitive electronic rear wing that can be raised at the flick of a switch. The shift-knob is placed closer to the driver so that less time is taken to shift. Five pre-production prototypes with aluminum chassis were built, followed by eight with composite chassis. Following these, it is believed that only 95 GT and 31 SS production models were constructed.

Source: Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.