Tuesday, February 24, 2015

1992 Subaru Version-L Alcyone SVX 4WS - Approved


This is another odd one that got approval. Someone wanted a 4WS SVX enough to get it on the list of approved vehicles for Show or Display.  Similar EPA certified cars were sold in the US, so bringing them into EPA compliance wouldn't have been an impossible task.




The Japanese-spec "SVX L" received four-wheel steering in 1991 and 1992, model code "CXD" (1,905 built). The VTD equipped versions received the "CXW" chassis code.

A sportier continuous traction delivery system, called VTD (variable torque distribution) by Subaru, was used in vehicles for sale in Japan, the UK, the Benelux region, Sweden, Australia, Spain, Austria and Brazil. The VTD AWD system is a permanent AWD due to its 36/64 split.


HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Monday, February 9, 2015

1998-1999 Mercedes Benz CLK-GTR Coupe - Approved

1998-1999 Mercedes Benz CLK-GTR Coupe - Approved


Here is another car that fits into Show or Display well. 35 total cars. 20 road going coupes, 6 road going roadsters(also approved for Show or Display).  Homologation special for racing.  6.9 liter V12. 604 horsepower. 


Even though the FIA GT1 class was cancelled for 1999, Mercedes was obliged to finally deliver the required 25 road cars they had promised. An initial road car was built in 1997 in order to meet initial FIA requirements, but this car was retained by Mercedes. For the other 25 road cars, each was built by AMG at the Affalterbach factory between winter of 1998 and summer of 1999 and differed only slightly from the race car. All of the 25 CLK GTRs ever built were left hand drive except for one which was specially built for Sultan Hassanal Bolkiah of Brunei. Driver comfort and refinements were at a minimum in the construction of the road cars as Mercedes-Benz wished to not only offer customers a true race car, but also to attempt to keep the price low. Leather was used in the interior and an air conditioning system was offered. Two small storage lockers were also built underneath each upward swinging door. Traction control was also added for driver safety.
The car retained much of the design of the original CLK GTR instead of the CLK LM, including the V12 and many stylistic elements. One key difference was the rear wing, which used a hoop-style integrated wing in place of the separate racing wing. From the otherwise unrelated standard production Mercedes-Benz CLK, only the instrumentation, front grille and the four headlamps were used.
Ilmor Engineering provided enhancements to the engine, increasing displacement from 6.0L to 6.9L. This increase in displacement coupled with the removal of a racing air restrictor allowed for 612 PS (450 kW; 604 hp) and torque to 775 N·m (572 lb·ft). Mercedes-AMG claimed 0-100 km/h (62 mph) in 3.8 seconds and a top speed of 320 km/h (199 mph).



HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Thursday, February 5, 2015

1991 Nissan Pulsar - Not Approved

1991 Nissan Pulsar, Not Approved for Show or Display

Just our guess, but we imagine when someone applied for Show or Display approval for a 1991 Nissan Pulsar, it was for a GTi-R. Also called Baby Godzilla, this SR20DET powered, ATTESA AWD, hatchback was one of Nissans forays into rallying.

"The Pulsars were manufactured in Japan between August 1990 until November 1994. The total number produced during that time was somewhere between 12,000 and 15,000. It is unclear how many of them were RA and RB models. The first year of production (1990–91) was the largest due to Nissan needing to fulfil the FIA Group A regulations (of 5,000 models total, with 500 of them homologated) in order to enter the model as a manufacturer in the WRC."

Since there were over 12,000 cars produced over the entire production run, they are way outside the realm of Show or Display.   However there was a NISMO edition, which they only produced 21.  Rare, and hard to find, but they probably would have got approval.

"
  • Nismo: Nismo offered a "complete car" version based on the RB model featuring many of the Nismo rally options (such as suspension, limited slip differentials, seats, roll cage and foot rests). A confirmed total of 21 were produced, all of which are individually numbered on a special Nismo VIN plate on the firewall. Some were used by Nissan and Nismo as promotional vehicles, the rest were ordered by private buyers. They were priced at¥3,140,000.

However, the first Pulsar GTi-R were produced in August 1990. So, here in just a few months, they start to turn 25 years old. So if you are looking for one, check out - importavehicle.com


NISMO plate on firewall. One of 21 cars. 













Group A Racing GTi-R

HELP

Thursday, November 13, 2014

Eligible and Not Eligible Vehicles Under Show or Display - October 22, 2014

Not Eligible - 1998 Nissan Skyline GT-R Autech 40th Anniversary Version

Check out the updated list below of vehicles that are eligible and not eligible for the Show or Display exemption.  At 25 years old, vehicles are exempt from NHTSA requirements. Contact importavehicle.com for more information on 25 year old car importation.






Thursday, October 30, 2014

Application for Permission to Purchase a Motor Vehicle Previously Granted a Show or Display Exemption Under 44 USC 30114


If you are looking to purchase a previously imported Show or Display vehicle, and the vehicle is under 25 years old, you need to submit this form to the NHTSA. Contact us with any questions you have.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.