Tuesday, June 3, 2014

2000 Mitsubishi Lancer Evolution Tommi Makinen Edition RD- RHD - Not Approved

Mitsubishi Lancer Evolution Tommi Makinen Edition 

2000 Mitsubishi Lancer Evolution Tommi Makinen Edition RD- RHD

Evos are cool cars. 4G63 powered, all wheel drive. 4 doors. Even though they are a heavily front drive platform, they preform well on the track, and in rallying, which is where this special edition gets its name. Tommi Makinen was a four time World Rally Champion that drove the Mitsubishi Lancer Evolution in each. This car was a variation on the normal Lancer Evolution. I haven't seen any production numbers, but it seems that more than 500 were produced. This vehicle was not approved for Show or Display.  Fun car, too bad.

Yet another special edition Evolution VI was released in 1999: the Tommi Mäkinen Edition, named after Finnish rally driver Tommi Mäkinen that had won Mitsubishi four WRC drivers championships. It featured a different front bumper, Red/Black Recaro seats (with embossed T. Mäkinen logo), 17" Enkei white wheels, a leather Momo steering wheel and shift knob, a titanium turbine that spooled up more quickly, front upper strut brace, lowered ride height (with tarmac stages in mind), and a quicker steering ratio. Amongst other colours, the Evo VI came in either red (Tommi Mäkinen Edition only), white, blue, black or silver with optional special decals, replicating Tommi Mäkinen's rally car's colour scheme. This car is also sometimes referred to as an Evolution 6½, Evolution 6.5, or TME for short.
Evo Magazine buying guide for the Mitsubishi Lancer Evolution - TME.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Monday, June 2, 2014

1996-1997 Maserati Ghibli Cup - Approved

1996-1997 Maserati Ghibli Cup
With only 60 of these Maserati Ghilbli Cup produced, they fall well under the 500 maximum for Show or Display. It was more of a special version of the Maserati Ghilbli, still it managed to get approval for Show or display.

Check out this article on Pistonheads.
The Ghibli Cup was derived directly from the Open Cup racing version and modified for use on public roads. Launched at the Bologna Motor Show in December 1995, the 2-liter V6 was rated at 330 bhp at 6,500 rpm, giving the car an effective top speed of 270 km/h (168 mph). The torque value was very constant above 35 kgm from 3250 rpm to 6700 rpm. Compared to the normal Ghibli, the suspension was lowered and stiffened and the front discs were now drilled and equipped with Brembo calipers.

Externally, the car was somewhat understated but the game was given away by 5-spoke Speedline alloy wheels and the racing-type aluminium fuel cap at the base of the rear pillars. The discreet Ghibli Cup logo was located on the doors, only the Maserati badge gracing the boot-lid. Available colors were limited to red, white, yellow or a shade dubbed French Blue. The interior was the sportiest yet in the Biturbo family, though still cosy and well finished. It featured a Momo racing wheel, drilled aluminium pedals, carbon-fibre inserts and black Connolly leather seats.

Just 60 Ghibli Cups were made, each one bearing a numbered plaque on the dash, though interestingly a further 15 Ghibli Cups were produced upon request with a tweaked version of the 2.8-litre engine.
Source: Maserati

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Sunday, June 1, 2014

2010 Morgan Aeromax - Approved

2010 Morgan Aeromax

There were only 100 Morgan Aeromax's produced, meeting the first section of the Show or Display requirements. It really isn't very technologically or historically significant, but I think someone might have a soft spot for Morgans, so it was approved.  It has a BMW V8 engine, that is capable of meeting EPA requirements.

The Morgan Aeromax is a coupé variation of the Aero 8. Production was limited to 100 cars.







Source: Wikipedia

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

1978 Australian Ford Falcon XC Bathurst Cobra - Approved

1978 Australian Ford Falcon XC Bathurst Cobra
1978 Australian Ford Falcon XC Bathurst Cobra
Australia has had its own division of Ford since 1925, unfortunately the Australian manufacturing is going to stop in October 2016 due to rising costs and slow sales. They build cars for the Australian market, that often aren't sold in other parts of the world. In this case, as a special last edition, they made 400 of these Ford Falcon XC Bathurst Cobras in 1978.  Now these cars are over 25 years old, and could be imported exempt from FMVSS.  Since there were only 400 cars produced, last of the run, this was a good car for Show or Display

"In 1978, Ford Australia unveiled plans for an all-new Falcon, dubbed the XD, that would be released in 1979. Unlike the current XC, the new model would be offered only as a four-door sedan or station wagon, meaning the two-door XC Hardtops of 1978 would be the last of that design.

In December 1977 Ford built 13 special order XC Falcon GS Hardtops. These cars were specially modified in the "Parts and Accessories" or P&A workshop, at Ford's Broadmeadows factory. All vehicles were modified and fitted with the body mods and mechanical specifications (including the "evolution" upgrades) approved by CAMSfor homologation. Changes were mostly designed to enhance race durability, these vehicles, often referred to as "Pre-Cobras", were inteneded to be raced by teams in the 1978 ATCC season. The changes made in these Hardtops later formed the basis the 30 Option 97 Cobras [1]

When final production of the XC Hardtop at the Broadmeadows Assembly plant ended in March 1978, 400 body shells were left unsold and Ford Australia faced a dilemma of how to market them, rather than scrapping them or attempting to sell them to customers who would otherwise wait for the XD. When an original proposal to turn these cars into Playboy-themed cars (complete with "bunny" decals) was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was touring Australia at the time. He and a local design team elected to capitalise onAllan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "totally American" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype was built in late April 1978 and production began that same July.

The cars were painted bold blue and Olympic blue racing stripes and finished with snow white and "Cobra" emblems, a throwback to Carroll Shelby's Mustangs of the 1960s that made the car easily identifiable as a Fordmuscle car. Unusually, the bodyshells were painted blue first, the intended blue stripes then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially-numbered plaque (from 1 to 400) in the dash. The first 200 produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland (the exception Build number 1 was a 302 and Build Number 351 was a 351).

Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes and limited slip axles, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were fitted with sport cloth seats in black with blue inserts and based on the 1978 Ford Falcon GS Coupe. From number 2 to 31 were known as Option 97, were fitted with optional parts to allow homologation for racing, including twin thermostatically controlled fans, an engine oil cooler and racing seats. They were identified from the other 370 Option 96 Cobras by a large rear-opening bulge in the hood. Allan Moffat raced a "look a like" Replica in 1978 Bathurst 1000.

Falcon Cobras are still highly revered by collectors across Australia and most still exist. A mint example can be worth upwards of $100,000."



Source: Wikipedia






HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.

Sunday, January 19, 2014

1990-1992 Lotus Opel Omega (LHD)


Here is another car that has been approved for Show or Display. They are getting close to being 25 years old, so if you wanted to wait, you could always wait until the car is 25 years old.  Very specific it having to be left hand drive (LHD). The prices overseas look like they are in the $40,000 range for one of these cars. 3.6 liter twin turbo.  377 horsepower, 177 mph sedan. Looks and sounds like a fun car.

3.6 liter twin turbo. 

Performance modifications started with an upgraded engine, which was enhanced by Lotus from the standard Opel 2969 cc 24v straight six unit (used in the GSi). The engine was enlarged to a capacity of 3615 cc.[2] Lotus then added twin Garrett T25 turbochargers, which provide up to 0.7 bar of boost from about 1500 rpm. The original distributor ignition system of the engine was replaced with a three-coil wasted spark system. The distributor drive was re-purposed as a water pump drive for the water-air intercooler circuit. The intercooler itself is manufactured by Behr and is capable of reducing the temperature of the compressed charge from 120°C to 60°C.[3][4]
In addition to fitting two turbochargers and an intercooler system, Lotus directed a number of engineering changes to the engine so that it would perform reliably with the higher power output. To cope with the higher cylinder pressures (about 95 bar), the external webbing on the engine block was reinforced. The crankshaft was replaced as well; early development crankshafts were machined from billet steel in Italy, but the production units were forged by Opel and sent to Maschinenfabrik Alfing Kessler for machining. The cylinder head was left mostly the same as the 24-valve head from the Opel Omega, although the combustion chamber was milled to reduce the static compression ratio to 8.2:1 (from 10.0:1). The engine is fitted with forged slipper pistons produced by Mahle. Piston connecting rods were replaced with new units made to an original Lotus design.[3]
The same six-speed manual ZF transmission as fitted to a contemporary Chevrolet Corvette ZR-1 was used to transfer this power to the rear wheels via a rear limited-slip differential from the V8
For more information on the Lotus Opel Omega check out Wikipedia.

HELP

HOW YOU MAY APPLY FOR PERMISSION TO IMPORT

Your signed application must include, at a minimum:
1. Your name, address, phone number, and FAX number.
2. Vehicle identification – make, model, model year, VIN or chassis number,
engine number, date of manufacture and mileage.
3. Location where you will store the vehicle in the United States.
4. Statement describing use on the public roads, if intended. If on-road use is requested, identify the Independent Commercial Importer (ICI) that will modify the vehicle to bring it into conformity with the requirements of the Environmental Protection Agency.
5. Basis for the application.
6. Attachments:
1. Photographs – ¾ frontal, ¾ rear, interior, odometer reading and special features (if appropriate).
2. Document from manufacturer or recognized historical source, identifying total production (production verification).
3. Proof of insurance conditioned on limited on-road use (not more than 2,500 miles accumulated in any 12-month period).
4. Identification of vehicle’s:
1. Technological significance – You must identify (be specific) the technology, engineering, and construction features of the vehicle that are advanced and of an unusual nature not commonly found in motor vehicles manufactured in the same time period; or
2. Historical significance – You must identify the historical significance of the vehicle. If a person of historical significance owned the vehicle, you must submit proof that this person owned the vehicle. If the vehicle was the first or last vehicle of a particular model, you must establish this through the manufacturer’s documentation or, if this is not available, through a recognized historical source. If the vehicle was "one of a kind," you must establish this also.
Items of significance must be numerically listed followed by the reason why the item is of significance.
You may then mail the application to:

Import and Certification Division
Office of Vehicle Safety Compliance (NVS-223)
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Room W45-205
Washington, DC 20590

ON-ROAD USE

A vehicle eligible for Show or Display may receive NHTSA approval to be driven on the highway. The odometer must not register more than 2,500 miles in a 12-month period. NHTSA approval of limited on-road use is to allow the vehicle to be driven to and from nearby displays of similar automobiles. Another reason permission is granted is to maintain the vehicle’s engine, braking, lighting, and other dynamic systems in good working order. The vehicle is still required to meet EPA requirements. If the original engine in the vehicle will be replaced with a non-original engine to meet EPA requirements, it must be identified in your application since it may impact on the technological or historical significance of the vehicle. Email me if you need help importing vehicles.